How is Port Forwarding DoNE?

[list]
[*]Dont Bother
I am Posting Video's for all Router's.




Basic Steps [VERY IMPORTANT] :


Install Latest version of Apex DC ++

Share 10 GB and connect to popeye hub - popeye.hubip.net

add hub to your Favorites and tick mark it in favorite hubs to auto reconnect it.

add Apex dc exceptions to your windows (both public and private) and antivirus firewalls

goto start >>> CMD >>> type - ipconfig/all

note ipv4 address (LAN IP address) and physical address (also known as MAC address), these both are mostly available under ethernet adapte tab.

then open router Page :

BELKIN = 192.168.2.1
NETGEAR = 192.168.1.1
LINKSYS = 192.168.1.1
DLINK = 192.168.0.1
Iball = 192.168.1.1
TPLINK = 192.168.0.1
ASUS = 192.168.1.1

Dlink:                             Username: admin                  Password: <Blank>
LINKSYS:                     Username: admin                  Password: admin
Iball:                              Username: admin                  Password: 1234
Digisol:                          Username: admin                  Password: password
TP-Link:                       Username: admin                  Password: 1234
Netgear:                         Username: admin                  Password: password


then Goto Port Forwarding Section (also known as Vistual Server section in old routers)

Do Port forwarding of 1000-1003 or 2000-2003 ports (Any one)

then Goto DHCP REVERVATION TOPIC and do DHCP Reservation of ur ip, so that it wont change.

DoNE


VVIP : Select Traffic type as "Any" or "UDP/TCP".
http://popeyehub.blogspot.in/p/wi-fi-users-only.html

Do everyone with the router has to do this all steps?