Some settings for Dc++

by 1080p Fri Jul 25, 2014 1:45 am

Tutorials

Before asking any Question about errors in PM or main chat refer:
http://popeyehub.blogspot.in/p/frequently-asked-questions.html

IF You are facing ANY problem with your DC settings and not able to rectify it,
Please make all the changes in your DC settings,
EXACTLY as shown in Following Snapshots (all topics).
Note: Remember to restart DC software after making any changes to its settings.

>>Here is how to change to new-ip address in your dc client software.

Some settings for Dc++ A1

SEARCH has been Enabled for ALL USERS Permanently
***SEARCHING is disabled in passive mode!

If you are facing this error please make following changes:-

***We Reccomend an updated DC software like APEX DC.
(Strong DC is old and sometimes faulty has not been updated since 4 yrs after 2.42 version)
Leave your Team Viewer ID and PASSWORD to one of the Admins, If you want LIVE help,
only after trying above settings.

******Please note TEAM viewer allows Admins to control your PC live ONLINE
and Assist you with ur DC problems. Its not a Hacking Software !!!******
Team Viewer generates an ID and password after install, which
you will need to copy-paste to an admin in PM, so he can access your Computer.

Main Chat Problem

Register yourself into hub (Pre-registration REG+ Tag
100 GB minimum share valid for 7 days) This will enable your main chat.

After sharing 100gb
In main chat type : !regme<space><DesiredPassword>
Example: !regme 123456

Speed Issues

Those who are getting very low speeds( about less than 100 kbps)
Try this: Check your "Speed and duplex" settings >> Right click on the network icon
to view "network and sharing center / network connections" >> choose wired LAN
connection to see its properties >> Press "Configure button" and then choose
"advanced" tab >> in the list, look for the "speed and duplex" or "link speed" >>
Change its value to "100 mbps full duplex" / "Auto neg." OR CONTACT UR isp.

Some settings for Dc++ S1

Increase Dc Downloads Speed(depends upon users sharing same data)

you can do the following settings in your DC++ software

Some settings for Dc++ Speed+increase

Close Dc software and restart to save the changes.Apex Dc speedMod (check Downloads section)
allows you to leech data from max 250 users at once, when set to manual segments as 250.

Speed up ur mozilla firefox by SIDDY

LET ME SHARE A TRICK TO SPEED UP YOUR FIREFOX!!!!!!!!
IT IS 100% WORKING AND I TRIED IT ON MY PC ON BOTH DIAL UP CONNECTION
AND BROADBAND SERVICE....................SO ENJOY!!!!!!!!!!!!

THIS TRICKS WILL SURELY IMPROVE YOUR SPEED AND LOAD TIME OF
FIREFOX..........AND THUS FAST SPEEDY BROWSING!!!!!!!!

JUST FOLLOW THE FOLLOWING STEPS:-

1) Type about:config in the address bar, Then look for the following
entries, and make the cor responding changes.

2) network.http.max-connections-per-server =32

3) network.http.max-persistent-connections-per-proxy =16

4) network.http.max-connections = 64

5) network.http.max-persistent-connections-per-server = 10

6) network.http.pipelining = true

7) network.http.pipelining.maxrequests = 200

8 ) network.http.request.max-start-delay = 0

9) network.http.proxy.pipelining = true

10) network.http.proxy.version = 1.0

11) Lastly right-click anywhere and select NEW>INTEGER.
Name it "nglayout.initialpaint.delay"
without the quotes and set its value to "0" without quotes

-- SiDDY aka --.s!Dz.
aLL Iz WeLL

Track Your DC Downloads from anywhere in the world !!!

Going out or mom yelling at you to not to sit on your pc ??
and just cant afford to switch off your pc to stop those precious downloads
of your computer ? So here it is the very best way to monitor and control
your downloads from a remote device such as a GPRS
enabled mobile phone or at college computer !!

Many of us use DC++ client over local and internetworks to download several movies
and song from people around the world !
We can use the inbuilt function called "webserver" in apex dc++ client.

All you have to do is, go to the "Settings" of dc++ and select "Experts Only"
option(after expanding "ADVANCE").

Some settings for Dc++ 22

A window named "webserver" comes up,
where you have to define username and password you wish to use when accessing your computer.

Also you may want to change the default "Port No."
to something like "1234" and hit "OK" to save the settings.

Final step is to Enable this webserver option
from the "Advanced settings ".

Some settings for Dc++ 33

Congratulations!! your webserver is ready to
serve your information about your DOWNLOADS in dc++.

>> Now a small thing which you need to remember is your computer's ip address
through which you are connected to the internet. To know this ip-address
you can google "what is my ip address" and save it or write it down.

If you wish to access this server by local area then you
should type: "ipconfig /all" in the command prompt
and note down the local ip adress of your machine.

To check the working of the server, just type localhost:port no.
for example localhost:1234 in your internet browser
to see the following page :

Some settings for Dc++ 44

Enter the username and password on the fields and use the Menu options
to view downloads/ uploads and history etc.
Also you can even switch your computer off or put it to sleep,
when your desired files have finished downloading.

Some settings for Dc++ 55

How to use DC themes and install them

>> First of all you will need Strong dc or Apex dc installed in you computer,
doesn't work with standard DC ++ software.

>> Download .dctheme file.
>> Go to DC settings >> choose "colors and fonts" option.
>> Press "Import" button, a file browsing window opens, to ask you for the downloaded .dctheme file.
>> Press "open" and save settings and then restart DC to save and apply changes in your settings.